[timmy]

Yes I got 2 new RCA tubes and one started to red plate but I pulled the plug. So if the damper is bad would it pull the voltage down along with red plating a tube. I have a new damper I wasn’t able to check the one in the set. The only other thing I found that I missed was a 25 v150 uf cap to the contrast and brightness but it checks at 223 uf so I’m changing that one. It seems once chassis is in and the convergence and tuner are plugged in then the voltage drops but the convergence is low voltage don’t think it would pull b+ down the way it is.