|
Put in the 1w wire wound 15k resistor you have for R215, then check on the other end for warm resistors that they are giving power to.
And, if you have not done so at this point, replace disc capacitor C61, that is the only one that is NOT going through a resistor on the farther side of the 190v line, all others have current limiter/ voltage drop resistors that should be warming up with power pushed through them.
This again can be related to V6 cathode or even the socket, as it is the only tube that has a direct connection to 190v w/o going through resistors.
The whole point of putting in the new larger watt R215, is so it will heat up less, and hopefully make the problematic heat more and easier to find, it's bad anyway at 18k.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
|