|
Well sams shows 140v on pin 3 of the hots there’s only 100v and the 10k 20 watt resistor is good tried 2 new hots still 100v the 330 resistors are good pulled the 6bk4 cap still 100v and the 385v source on the end of the 10k resistor is there so this flyback may be screwed and it’s new. If I pull both hots the voltage is ok on pin 3. Ok update problem solved I hope the bars are gone don’t know yet if I’ll have video that’s the next post.
Last edited by timmy; 10-08-2022 at 01:00 PM.
|