If you have replaced them already, you have virtually nothing to gain by replacing them again at this point, the problem is someplace else.
C3A, C2B, C3B, C2C,
https://www.mouser.com/ProductDetail...nVkrybSw%3D%3D
https://www.mouser.com/ProductDetail...j1prphYw%3D%3D
https://www.mouser.com/ProductDetail...K8MOO7xA%3D%3D
prob replacements.
“low esr” caps are really not the right kind for this area, and hard to find in the values needed, General Purpose Electrolytic Capacitors will do just fine here.