|
Ok so I have the chassis out again and I tried taking the cap off in the set 20kv no higher I have the yoke plugged in on the bench waiting a few minutes to warm up both boost voltages are there tried 3 rectifier tubes just won’t go above 20kv cap off or not again subbed some tubes nothing make a bit of difference the other voltages that we’re dropping don’t anymore since I wait for warm up. I even tried the 0039 and 0068 caps the old ones which are good still. The 140 at the hot is around 160v and the oscillator tube is still giving voltages that are to high 6 and 3 are 165v.
|