|
Pin 3 v1 64 volts add antenna 74 volts and if I up the gain the voltage drops highest voltage is with the gain at min I think this subber clock wise is low gain. I think I’m going to focus on v1 because voltage does go up on both v1 and v2 with antenna on so it is working but not enough. There are a few resistors a 22 ohm that measures 25 ohms don’t seem to high and the 18k measures 17.40k I’ll have to double check the 2.2k.
Last edited by timmy; 10-23-2022 at 08:51 AM.
|