|
While I can understand the IF but what happened here today I still think there is something shorted possibly to ground maybe a cap that I didn’t change yet there are caps still in there originals because on the bench the hv jumped instantly as if there was an arc and at the same time the voltages jumped up on the IF but it was instant a bad alignment would not do this hv jumped 4kv and the IF 15v so I’m going to hope to find this it could be anywhere and besides the picture has flickered in clear on it own several times already so I don’t think the IF is out. I have no idea how I’m going to find this because other then the agc pot not working probably because it’s maxed already trying to fix the signal all other controls work even though something could be leaking somewhere or to ground. I’m sure it wouldn’t take much to corrupt the video signal. So bottom line is voltage still dips diode gets hot so something is not right. I have 2 4 amp diodes I tried they only get warm so it’s not a diode. To bad this forum dont have audio easier to talk then type.
|