|
The boost tap is pin 7 (should be) , L42 is pin 1, which is on the bottom of that winding, so there should not be boosted voltage at L42, but only the base bias that's fed to pin one.
What you may want to do is double check the resistance of that winding.
.8 .5 .45 & 9 ohms for each taps .
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
|