Quote:
Originally Posted by timmy
I already put the original k1 back in problem with it is the 2.2meg measured 2.4meg and the 2meg measured 2.4meg the 24meg measured 30meg and the 680k measured 740k this is why I made it up so I’ll leave it in for now and it may not be needed at all.
|
https://www.allaboutcircuits.com/too...de-calculator/
that's all pretty much within 20% save for the 24 meg, which is just a hair.
most people say it's safe to let it go to 30%, then worry about it.
tube stuff is very forgiving with this!
