Quote:
Originally Posted by Yamamaya42
the AC current path of L42 was the reason for looking at the resistance of pins 1-5
http://suzaku.live-evil.org/L42.jpg
not really sure why it's hot if both FBT match, but this may be related to why the 100k ohm resistor burned in the first place. |
I had a silvertone that burned the resistor also. Is there a possible reason for the hot L42 from either the horizontal centering circuit or hv regulator like a bad cap. The centering boarders pin 5. Other then that would you use this flyback with the specs it has and the donut 585ohms.