Quote:
Originally Posted by timmy
The trap shown on sams is 22L1 but the one you found looks like the right one without the wiper. and yes I found that the trap was open from 57 years of vibration wore down the connections on the porcelain base so I took the cap off and put a bead of solder on each one and now it’s 200 ohms and it’s good now I put it back in. What is color bands across the screen when the color is turned up ?
|
PIC?
The correct setting for R22 is someplace between 0 & 200 ohms, but setting it has to be done in the alignment setup with a RF generator and scope, trying to do it visually most likely wont work very well.