UNLESS its the camera the live pix is TOO DAMN BRITE !!!
The set is still on its side also. If it is in reality when you get it
back on its feet you will need to re do the set up.
You should be able to turn the color, brite & contrast down & extinguish
the raster or nearly so. These sets were NOT brite ! In the day most
watched them in a darkend room with curtains drawn.
This is NOT a Chromacolor, Trinitron, EFL or FTM CRT that you could light
a room with. If you overdue the brite everything starts to fall apart pix wise
As for generators we did 90% of our set ups were by eye. Live shows worked
better for us & give a real world look at the pix. Try it. No confusing mirror,
just lay across the set, look at pix & reach back to adj. SO much easier.
Also generators can add problems if the TV's controls are not set right.
One last thing. Put up a pix of the set with NO signal, just snow. Snow
can tell you a lot believe it or not.
73 Zeno
