Quote:
Originally Posted by timmy
I assume you are referring to the slug in A18 that’s the one that’s stuck. How much voltage should I see on pin 1 of the phase detector if the oscillator is running or does it even matter if not running there won’t be any voltage.
|
No, A19 the phase detector, with tint at center, adjust till color is correct, Faces IE reds and greens and such.
@ Username1
the ones I suggested he replace with 1% was the matched pair of 470k
I prefer 1% because the price difference between 1%-5% and so on is pretty much insignificant, especially when resistors are bought in large combo packs of 300+ of multi values. the value i need is always on hand