View Single Post
  #148  
Old 08-05-2023, 12:16 PM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,165
That was braced on you mentioning you had color lock, if you do NOT, then A18 has to be tuned until you get lock.

This is NOT the right way to do it, but should get you by.
If you have no color lock, rainbow colors or in some extremes no color, tune A18 until you get lock, and find the sweet spot, tune up and down finding where it locks in and out and tune it in the center of the range that it locks, after that is done, you should not have to touch it again, unless something changes in the set, sometimes changing a tube can cause this to be upset and need adjusting.

THEN

once A18 is set to it's center of it's effective range ( no matter what crystal is in there )

you set tint control to center position, and adjust A19 until colors look correct, red/green, flesh-tones and so on.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote