|
The only thing that makes sense to me to raise positive bias is to remove the 25z6 and replace with one1n4007 , leave the heater connected, and wire in the diode from the 10 ohm resistor on the plates to the 40 UF / spkr field coil, making sure to keep the cathodes p 4/8 unhooked.
This will raise the B+ by a lot, but may also have an effect on the negative bias.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
|