Quote:
Originally Posted by bandersen
I suggest just tracing out the wiring on the pots. 4th terminal would be for tailoring the response of the sound. You could boost low or high end for example. Sometimes called a "loudness" tap.
|
Turn it up to 11!
I have an eico 324 signal generator myself, problem is with these, w/o a frequency counter it's hard to know if they are putting out the frequency you want or how well they are calibrated, not that you need to be THAT precise when you align, but i did mess up the first few times i tried,
then got a digital unit and got it pretty good on my 4th try on my Arvin.
I too will be watching the Alignment progress, As my FADA needs work and is much harder than the Arvin!
