Quote:
Originally Posted by Zsuttle
I went through and replaced the rest of the maroon caps after another two had issues. Was able to get a much more solid picture, and eliminated the flickering on the screen. I finally took care of the cateract, boy what a difference. The glue separated without much effort and came off as one big sheet.
Attachment 206810
How long should the horizontal take to settle in? The oscillator is noticeably drifting, enough to require readjusting every 30 seconds or so. It's not hard to get a lock, just hard to keep the lock. |
Yes, the caps next to the Y-amps get COOKED! and I had to replace mine.
I rarely have to adjust my horizontal hold, perhaps once in a blue moon when turned on, then it stays locked, there is a voltage dependent resistor in the power line to the horizontal hold circuit, if that is worn it could cause problems, but replacements are rather unobtainium.
