[QUOTE=dinorhino;3261915
I left the really tiny non polar caps and really large high voltage caps, maybe this was a mistake. I did test every original cap with a ESR meter and they all tested well within spec.
[/QUOTE]
My large caps leaked out fierce on the first diversity unit I opened up, most trace repair was in that relay area.
[QUOTE=dinorhino;3261915
I'm using a 16V 4.5A laptop charger to power both the diversity unit and tv.
[/QUOTE]
I use just the 12v rail of an atx power supply. (amperage permitting)That should be enough as these are automotive electronics.
Quote:
|
Originally Posted by dinorhino;3261915
HelloVoltage, any information you can give me on what you had to repair and replace on either unit, please share!
[/QUOTE
|
I'm making a full repair video for an xkv55. Frown on the poor packaging on this one. only indextron to suffer shipping damage so far from japan. bezel cracked. So far besides caps, I see at least one burnt out resistor. Waiting for mouser delivery.