Can you roll the vertical both directions and get it to almost sync in the middle? Also is horizontal sync fairly strong? If the answer to everything is yes then R94-95 and or C58-59 are probably bad (AGC setting could be excessive too).
If horizontal sync is weak check those components plus the components around the noise in sync sep and sync amp tubes (AGC could be set too low or high as well).
If vertical can't roll both directions around a near sync condition then check components and power around and supply voltages feeding the vertical mult and output tubes.
Could be bad tubes, caps, resistors, insufficient B+/boost, adjustments or a combination there of.
http://earlytelevision.org/pdf/rca_ctc9_sams_459-1.pdf