Quote:
Originally Posted by Kevin Kuehn
That could be too. In general there seems to be an under scan issue. Ordinarily one should be able to fill the mask plus a little more to keep from seeing the edges during line voltage fluctuations. Chris you may want to consider posting your picture over on the ARF forum. Things seem a little slow around here and their are some really sharp engineering types over there as well.
|
I’m going to play with the yoke that’s in it currently and make sure this is a real problem and not some error I made when installing the yoke. The only other thing is Tom mentioned this chassis and the yoke are a bit unique. But I can’t see why that would make a difference. The only things that are different is it’s a stronger CRT and I put in the yoke. This yoke/chassis combo was fine in the old set in terms of deflection…the picture was bad because the CRT is weak. Now that chassis and yoke is in a cabinet with a strong tube so this should work shouldn’t it? If I had swapped the CRTs instead we’d be in the same configuration but in a different cabinet so that’s why I need to make sure the yoke is in there correctly.