Quote:
Originally Posted by Kevin Kuehn
Congratulations.
Is this the same bracket you're dealing with? Here it's missing the focus coil on the rear as it's jigged up on a KCS 40 chassis with the 5AP4 test crt, which needs no focus. This chassis is for a TC166 console which also has the 16GP4 crt.
 |
Now that I can see how you have rigged this and I'm more familiar with the yoke/focus assembly, I might be able to pull the chassis and work on it for real on the bench. I have a 5AXP4. I see your ground clipped to the bracket. How did you get HV from the output socket on the HV cage to the test CRT? Is there anything more to removing the focus coil than removing the screws on the top (seen in your picture) and bottom? If I can work on it out of the cabinet, we can move on to the next issue...channel and sound not matching up. Been through this before and I hope there's an answer other than doing a full alignment!!!
I have an additional topic I'll post separately. The horizontal deflection circuit on these early TVs confuse the hell out of me. The KCS 47 has a horizontal hold, horizontal frequency, horizontal waveform, horizontal drive, horizontal lock, horizontal linearity and width adjustments. Just kill me now!