[Alex KL-1]

Originally Posted by pac.attack76

Would you be able to mark all of the ones I should remove as I'm not sure which ones to check?
https://flic.kr/p/2rDEQSL

Outrageously busy now but... you can measure all, note that Schottky will have a typical low value of measurement (in the diode scale of a DMM), like 80-160 (after some seconds for charging the caps), you can need to remove only the ones that measure far from it (eg. if one measures 30, or short - near zero). Ordinary P-N diodes will measure 450-700.