No sign of SMD in this set, not so for my H845 (1962 Z), which I performed my first IFT surgeries on.
The best the G725 will do is FM 101-108, a commercial end of band around here! Full in osc slug gets 101.something and top of scale is 113 MC on the frequency counter.
AM band while incredibly sensitive BUT maxes out at 1550 KC. Trimmer cap screw almost falling out just to get that high. Again to schemo, some parts of FM oscillator slug coil are low-pass for AM and thus, part of the circuit.
Both new caps seen below 50pF and 22pF, experimentally varying those two +30 /- 10% doesn't help for extending ranges. Moving stuff around doesn't change much either. WTF?
G725 12AT7 mix-osc.jpg
Some older caps remain, .001 dogbones and .68pF across pins 1-7. Also wondering if varying resistances of 10K and 1K changes osc freq?