Quote:
Originally Posted by Electronic M
The side of the solder pot terminals usually works best. I recommend choosing the biggest tip for best thermal mass and conduction to the terminal.
|
Got the biggest chisel tip ready to go. Replacement caps will be here tomorrow, so I should be able to get them installed, check over the entire chassis for anything I might have disturbed in my work and all new transistors for proper orientation. Then it's time to reinstall the chassis and fire it up. Fingers crossed.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|