Quote:
Originally Posted by Yamamaya42
resistance check of where that wire SHOULD go, to ground, checks OK, meaning the main HV coil is good.
For lack of any better idea, I will try a 180 ohm resistor in place of the 18, when I replace the selenium rect with a modern diode.
|
So you’re going to add a resistor while replacing the selenium so why don’t you check the voltages without putting a resistor in if you do need it ok you may not. All my Motorolas got silicon diodes and none of them have a resistor the voltages are all where they should be. You never know with the resistor it may be low.