|
Connecting to C1 with tuner, generator doesn't bring up anything useful. I can tell the generator is doing something as the screen changes a bit as I set the output level, but it never brings up anything even close to a pattern. With the IF removed, no amount of brightness setting brings up any raster, etc. I'm going to go over my pics of the underside and trace exactly where the IF out goes if not directly to C1.
I tried testing the voltage on the video out of the generator, but it only went up as I moved the output level and then dropped to 0 after moving it. I think I'll connect it to my scope and see if it actually putting out a composite signal.
If I'm not mistaken, I should be able to connect the center of a video out from my old DVD player to C1 and the outer to ground and get an image? I'm not worried about and if it works, I can let it go into screensaver mode as that really shows the jailbars.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Last edited by TinCanAlley; 04-13-2026 at 01:03 PM.
|