|
John-
I think the PVA is polyvinyl acetate. I'm not really sure.
The frosted glass does look like crap IMHO (ducking and covering). I would only put it back in a set that came with it originally. Is the original safety glass in the monitor missing? Should it be flat or curved? If it's flat, I'd get something made. If it's curved, one from a 21fbp22 will work. They have a gasket, and four tabs on the crt mounting ring hold the glass in place. Now that the glass is off, you have a 21fbp22. AFAIK this is directly mechanically interchangeable with the 21cyp22a, only the 2nd anode connection is different.
John
Last edited by blue_lateral; 07-14-2005 at 04:37 AM.
|