|
For the CTC 7 chassis here is the setup:
YP12
A-112 with B207 yoke extension
direct convergence adapter
CVL1 ballast
A113 with B230 CRT extension
For the 24MC32 use the following setup:
YP12 yoke programmer
A112 with B207 yoke extension
C319 or CC19 convergence adapter
CVL1 ballast
A113 with the B230 CRT extension
The RCA setup will be the same for the 7,9,10,11,12,15,16, and 20 chassis.
The Zenith setup will be the same for the 24mc32, 24mc42, 24nc31, 25lc20, 25lc30, 25mc30, 25mc33, 25mc43, 25mc70, 26kc20, 27kc20, 29jc20 Chassis.
Hope this helps,
Bill R.
|