|
Thanks guys. This Felton never came with an IF cover. I'll replace the caps in the HV section. Should I replace the caps on all of the screen circuits or just for the color drive section? Testing a cap involves removing it from the circuit, testing it's capacitance, then putting it back in, right? Quite a lot of work, but I'll do it if I have too. :P I'll definately look at the HV caps too. The elemenco caps and similar looking guys I'm going to change. The electrolytics are all changed.
One more thing, can I put in an IEC AC jack (the kind of power jack on computer PSU's and such) in the chassis and connect the earth ground to the chassis? Will this harm anything?
Thanks.
Jonathan
|