|
Does the ctc-10 have service switch? can't remember if it does or not.
What I do if it has the switch is...
turn down all screen controls all the way
set service switch to Service
advance each screen control until a line is barely seen for each color.
If some screen controls won't produce line even all the way up, adjust the Kine bias higher till you can get a dim, just visible line for each color.
If there is no service switch I just turn the channel to snow and adjust the screen controls to make a neutral white colored snow. Turn the brightness up then all the way and make sure the CRT isn't overloading with retrace lines. If it is, turn the screen controls down till retrace lines disappear.
Then to adjust the drive controls I just turn the set to a picture, turn down the color all the way, and adjust drives so that the picture is an even black and white with no color tint to it.
|