|
vacuuseal
a small bottle is all you need,a pic of the seal on my tube is on petes website someplace..you just apply it around the metal to glass seal at the faceplate,i did several layers,and the stuff takes almost over a month to cure at room temp.. car body shop oven will speed it up..
so do you get any type of emmision on your tester from this tube?
is the getter white?if i remember my tube had a weird glow but only on a older sencore tester,when i tested it on a new cr-7000 it was not there,but had perfect emission,this was when it was first being "wokeup" after asleep after many many years..
terry
|