|
Sure, I'll PDF it at work tomorrow.
When you pull the color osc tube, does it rainbow? As I recall, it should (turn color up 100%).
If I recall correctly, ground pin 2 (grid) of 3.58 osc and adjust L702 (reactance coil) for slow drift/stationary rainbow. Definitely check area for cold solder joints. Also, the crystal can be bad. If you have a known good one, I'd slap that in after checking all the surrounding PCB.
If you get the color back, adjust reactance coil, and the adjust 3.58 osc coil, for good flesh, with tint control mid range, watching a quality broadcast.
Good luck,
Phil
Last edited by reeferman; 08-13-2006 at 10:11 PM.
|