|
Evening folks:
Yeah, Alignment is the last thing to touch, I learned that the hard way many years ago but thanks for the warning. The tuner is definitely at least part of the problem so you nailed that one Steve. I injected an IF signal and was able to adjust it so the display on the scope was fairly clean and stable. I then threw a tuner sub in and the signal was greatly improved over the original tuner. Tomorrow I'll open it up and give it a good cleaning. I will then proceed from there. I intend to get the video looking good on the scope before trying to reassemble the CRT and cabinet.
Interesting you mention the peaking coils Chad. Some were, of course, open from the well documented corrosion. I replaced them using the part numbers recommended on Pete's site. I assume these are known to work OK.
I really appreciate all the suggestions and support guys.
__________________
Tim
|