|
|
|
#1
03-07-2025, 12:46 PM
|
|||
|
|||
|
National Panasonic TR-101CT scans
  will add more as in future edit 17:03 3/7/2025 archived at https://archive.org/details/tr-101ct/ https://i.imgur.com/CqP5HJi.jpeg https://i.imgur.com/LfcOUJ2.jpeg https://i.imgur.com/h0rou60.jpeg https://i.imgur.com/z32dz1W.jpeg https://i.imgur.com/csXKZGW.jpeg https://i.imgur.com/l0kX2bi.jpeg https://i.imgur.com/20ROimq.jpeg https://i.imgur.com/CmcXP1c.jpeg https://i.imgur.com/lkkoiD1.jpeg https://i.imgur.com/ELXxFGS.jpeg https://i.imgur.com/MW3q3tk.jpeg https://i.imgur.com/WfOYUx7.jpeg https://i.imgur.com/TKHHsCX.jpeg https://i.imgur.com/mwmbSsd.jpeg https://i.imgur.com/fR6TxJi.jpeg Last edited by HelloVoltage; 04-01-2025 at 04:14 PM. Reason: MORE INFO 
|
|
#2
05-21-2025, 09:12 PM
|
||||
|
||||
|
Absolutely fantastic - thank you so much for this!! As luck would have it, I just imported one of these from Japan and was wondering if service information had surfaced yet.
__________________
When you lower your standards, you set a new standard! ISO: Mitsubishi 6CT-338, Sony Chromatron 19C70/100, Yaou "Colornetron" GTC-9, etc...
|
|
#4
05-27-2025, 12:29 AM
|
|||
|
|||
|
Quote:
The only information I have that is useful for servicing is in the schematic posted. Reccommend you use a power adapter, not batteries as the battery caddy can easily break by now. so brittle. If you are testing using the AV in port, I suggest feeding the video signal directly to the board as the ports on all of mine have been finnicky.
|
 |
|
|
Linear Mode
