WTB: good 10BP4 - Videokarma.org TV - Video

dave1138 · #1 12-12-2009, 06:52 PM

Anyone have a good 10BP4 to sell?
I was given a GE "Locomotive" set and the CRT
is totally dead. I tried resoldering the base pins with no
improvement. I'm letting the filament run at 8 volts and will
see if there's any emission tomorrow. But if no success, I will need a good replacement.

bgadow · #2 12-12-2009, 09:58 PM

Check with Harry Poster?

Sandy G · #3 12-13-2009, 07:08 AM

Yeah, that's where I got my 10BP4...Harry's a Good Guy, too...

radio nut · #4 12-13-2009, 05:01 PM

Quote:

Originally Posted by dave1138

Anyone have a good 10BP4 to sell?
I was given a GE "Locomotive" set and the CRT
is totally dead. I tried resoldering the base pins with no
improvement. I'm letting the filament run at 8 volts and will
see if there's any emission tomorrow. But if no success, I will need a good replacement.

I have a very strong one that needs the aquadag reapplied, other than that it can be yours cheap,if not I have one that tested good at about 400 on my B&K.

dave1138 · #5 12-13-2009, 05:55 PM

Thanks to all who replied, I have found a good one.