|
|
|
#11
10-28-2015, 05:44 PM
|
||||
|
||||
|
This set is really confusing me. The power supply is no longer smoking but I STILL can't get a raster on the CRT i have about 6 to 7 KV but the CRT is weak. But I can't even get a very dim raster. This is really puzzling and I am not sure where to start with diagnosing and fixing this problem. All filter caps stay cool (I will replace them when I can get a raster). All tubes have been replaced except for the horiz out tube that is somewhat weak and is only a quarter way through the good zone and fails the trans-conductance on my hickok 600a. Any ideas where to start?
__________________
 Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring) Last edited by SwizzyMan; 10-28-2015 at 05:56 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode