|
|
|
#15
10-31-2009, 12:58 AM
|
|||
|
|||
|
By the way if you haven't done it yet check the Horizontal output cathode current. It should be under 210ma I think. Also check things like regulator current, HV, and Boost voltage. I am not looking at the schematics, but some sets use a boost voltage from the HV in some sweep circuits, as well as B+. I don't remember on the 16. I think it would be about 800 volts.
|
| Audiokarma |
|
|
Threaded Mode