GE roundie

[DaveWM]

will get pics as soon as I get it all back together. CRT is back in, setup the HV/purity. Still need to check the HOT cathode current (did it when I 1st got it but will check one more time). I noticed some arcing down on the pwr board around the varistor, Not sure what that was all about. guess I need to pull the chassis again and check the solder joints. The horz has some thing odd going on, I will get wiggles in vert lines sometimes, not others. Tried adj AGC no help (it works it just does not eliminate the problem). I may need to scope the sync pulse and look at it when the problem show so see if the issue is at the sync or after. What bothers me is its not constant just some scenes with vert lines will get the wiggles while other times not. I have a feeling its some video getting past the sync sep tube.