|
|
|
#33
11-13-2012, 01:55 PM
|
|||
|
|||
|
well at full line voltage of about 125vac I get about 220ma min, at 115vac its about 200ma, so I think I will look into using that tap. I will also check the HOT grid bias to make sure that is correct. Something that bothered me was when checking the 270v test point on the back of the chroma board, I came up with 250v and that was at full line voltage. Since the biggest draw on current is prob the sweep circuits, its just another reason to confirm that all is well in the horz out.
|
|
|
Threaded Mode