|
|
|
#11
10-12-2016, 08:09 AM
|
||||
|
||||
|
The HV rect plate lead broke off of a 1955 GE flyback because it was super stiff and I was not careful pulling it off, where the 1B3 was outside the fly "can".
Wax was already crumbling off the tire so I was able to make a connection just a few turns short, use an exacto knife and hyper-eutectic solder. Shmutz with black RTV when done. I wish you good luck.
__________________
"When resistors increase in value, they're worthless" -Dave G 
|
|
|
Threaded Mode