|
|
|
#11
11-02-2022, 02:03 PM
|
||||
|
||||
|
The reason for the bad video is that there is something out of tune between the input from the tuner, to the grid of V2, AGC has nothing to process, and therefore has no reference to set the gain of the circuit , but it is not an AGC fault, as was shown by the override test, the heating of L42 and any HV related issues, if they exist, are a separate issue entirely.
"The difference between v1 and v2 is that v1 8.2 resistor goes to ground the 8.2 don’t go to ground directly on v2. " since the measurement is not taken from ground reference, but from the main power point, this difference is infinitesimal, very high chance the SAMS is wrong and the 6k reading is correct for both.
__________________
=^-^= Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte. いとおしい人のために 
|
|
|
Threaded Mode