Quote:
Originally Posted by Yamamaya42
Before doing anything to L4, you should try what others have suggested, V1 removed, and feed in the tuner subber into pin 7 the same as you did before, through a isolation capacitor, to see if you can get any signal through, you may have to adjust the gain on the subber a bit.
|
I had taken v1 pin2 off L3 and fed the subber in got the same as befor and with that wire off L3 I tried pin 7 but the tube was in and I got less of a response. When I fed v2 I used pin 2
11-03-2022, 09:42 AM
Threaded Mode