![]() |
|
#11
|
||||
|
||||
|
Sorry....
When doing this, it may be smart to put a 1K or so resistor in series with pin 2 or 3...... disconnect pins 2, & 3 of L4. Take your tuner subber and ground pin 2 of L4, and using your coupling cap attache the tuner subber to pin 3 and see if a signal makes it to the screen..... Without a plate voltage there I'm not sure if it matters to leave V1 in for this part, or take it out. ..
__________________
Yes you can call me "Squirrel boy" |
|
|