|
|
|
#1
02-16-2026, 01:35 PM
|
||||
|
||||
|
Hickok 246 Bar Generator
I just got this unit and it tested out well. The manual goes over quite a few test procedures and the one I want to use is the ability to cut off the color guns. The unit has three leads with alligator clips that also have piercers for the wires. My only issue... I don't know which leads to clip them to. The CRT socket has three sets of wires for the different colors (yellow with color lines of red, green and blue, white wires with color lines and separate red, green and blue wires). I'm not sure which wires to connect to. Also, I would imagine once I know which wires, there are probably points I could connect to that doesn't require piercing the wires.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 
|
|
|
Threaded Mode