Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #36  
Old 04-10-2026, 11:14 AM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
VideoKarma Member
 
Join Date: Sep 2008
Location: So Cal, CA
Posts: 938
Question about 23.5V in the set. How important is this? The reason I ask is I tested the regulator and it seemed fine. However, what I noted was the installed regulator is 121-808 and the sheet attached inside the set has it as being 121-966. In order to find the differences between them, I had to compare the part numbers from the other manufactures listed in the SM. That lead me to compare ECG152 (121-966) to the ECG184 (121-808). I found datasheets on them from AllTransistors and they are definitely different, but I don't know what those difference would translate to or if it's even an issue. Since this voltage is in just about every circuit of the TV, it must be important.

Can someone with the necessary knowledge take a look?

Thanks!
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:52 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.