gun settings on ctc-10

[frenchy]

This thing has blue and green drive pots, R G and B screen pots, and a single pot for the Kine bias. Can anybody give me a quick and dirty list of what to do in order to set this thing up right, assuming I'm just starting from scratch? Lots of caps replaced, a few resistors, a few new tubes, rotten thermistor, and these pots fiddled with and cleaned during testing so I will have to start from the beginning. Plus it had a brightener on it which I am believe may not be needed now that the set has been gone thru completely, especially that crapped-out thermistor. Anyway I'd like to go thru it first with the brightener off and see if indeed it is not needed, if it is then I'll do the setup again with it. Or if this setup has been posted on another thread can you point me to it? I knew a little better how to do it on my ctc-15 since it had the kine switch instead of the pot. thanks!