silvertone roundie

[ctc17]

Look very close at the boards, most of the time sears has a little metal tag soldered into the board facing back with the number stamped into it. It looks like a little flat capacitor or something.

[timmy]

Originally Posted by ctc17

Look very close at the boards, most of the time sears has a little metal tag soldered into the board facing back with the number stamped into it. It looks like a little flat capacitor or something.

ok ill have to get the chassis out and find this number. i was just fishing for maybe something i could have looked for as a simple fix without pulling the chassis.

[ctc17]

You dont have to pull the chassis out. Its sticking up out pf the board facing back at you

Im working on getting our dearest timmy to get me a verified model number so I can get the correct sams and post a photo of the area of interest.
I went through a bit of trouble to compile a fairly complete set of sams and its ridiculous to be guessing what resistors it may have and what it may be a clone of. It takes me fairly little effort to grab the correct schematic and scan it.
We already left poor davewm in the oven to long on this one getting sidetracked on what might be