saw a predicta

[StellarTV]

Remove the brass 'bowtie' underneath the front of the screen being held on by two brass screws. Unhook the spring from the decorative brass colored plastic trim and remove, and then remove the two screws in either side of the CRT 'neck' holding on the thin metal strap. This holds both parts of the shell together.

When you reassemble, replacing the decorative plastic trimpiece can be a bear if you try to hold it in place while hooking it back onto the spring. Easy way is to hook both ends back on the spring and 'slide' the trimpiece back over the shell until it snaps into place.