Quote:
Originally Posted by Ed in Tx
I was speaking in general terms about that mechanism. Some models were accessible from the bottom, others you have to remove the mechanism as an assembly from the top.
I always used to unplug the connector and ribbon cables shown in the picture still connected, to completely move the board out of the way.
btw all pictures I found in minutes by Googling the model number and searching "Images". Very handy.
|
OK, well you were right the gear you spoke of was broken, it was cleanly broken in half, I was able to glue the gear back together with some special plastic bonder glue that was made by Loctite so hopefully it will hold. I'm guessing that this gear breaking in half like this is quite common on this and other similar models made by Sony?
03-11-2016, 03:03 PM
Threaded Mode