A real train wreck of an Admiral 19A11

[Kamakiri]

After a lot of work, here's where I'm at today. In order to get this far, I restored another Admiral 19A11 and used it as a blueprint going from connection to connection, tube pin to tube pin straightening out all the wiring and components. This has been a three month on and off project.

Sound is perfect. Any ideas on where to check from here? Bearing in mind that the set could have any one of a number of issues...including something hooked up incorrectly or a wrong value somewhere even though I took painstaking care to make sure everything was correct.

[ChrisW6ATV]

Originally Posted by Kamakiri

After a lot of work, here's where I'm at today... Any ideas on where to check from here?

In your picture, I see a vertical problem (off frequency, and maybe no sync?) as well as possibly a width problem.

Since you have two of these sets, I would try the relatively easy test method of comparing scope views and voltages (as well as maybe resistances) in the vertical circuits first.